MDTIM 60# One component thermal coductivity Silicone grease Silicone

Thermal conductivity 2.0 to 6.0 W/m.K Optional
High electrical insulation
High compression, low stress
Good temperature resistance
Low compression force application
Automation is possible
UL No.:E538545

Product description

MDTIM single-component thermal conductivity mud is a kind of silicone thermal conductivity product with strong plasticity. According to customers, different thermal conductivity products can be selected. Thermal conductivity mud, does not flow, does not layer, has good interface wettability, and the thickness of the minimum flattening gap can reach 0.12mm. The application process can be made into high compression flake products or hand-kneaded rubber mud according to the needs of customers, with efficient thermal conductivity effect and excellent caulking effect.

Data Sheet

Stats		Nominal values		Test method
MDTIM	25 #	35 #	60 #	–
Components		Silicone + ceramic powder
Color	white.	white.	white.	Visual
Density (g/cc)	2.75	3.1	3.35	GB/T 13354-1992
Extrudability (g/s)	6	10	2.5	−
Temperature tolerance range ℃)	-40~150			−
Volatile (%, 200 ° C, 24hr)	<0.5	<0.5	<0.5	GB/T 19281-2014
Oil dispersion (%, 200 ° C, 24hr)	<0.1	<0.1	<0.1	HG/T 2502-1993
Electrical Properties
Breakdown voltage (kv/mm)	≥ 10	≥ 10	≥ 5.0	GB/T 1695-2005
Volume Resistivity (ω.cm)	10¹⁴	10¹⁴	10¹⁴	GB/T 1692-2008
Dielectric constant @10MHz	6.5	6.8	7.1	GB/T 1693-2007
Fire rating	V-0	V-0	V-0	UL 94
Thermal Properties
Thermal conductivity (W/m-K)	2.5	3.5	6.0	GB/T 10297-2015
Thermal resistance (°C -in2/W) 0.3mm @50 psi	0.42	0.13	0.083	ASTM D5470

Application

Network communication devices – wireless modules, routers, VOIP phones
IT– laptops, storage modules, hard drives, scanners, printers
Consumer electronics — gaming systems, LCD PDP TVS and monitors
Industrial — leds, power supplies, power converters, scanners, industrial control equipment, automotive electronics

How to use

Instructions and precautions for use

Clean up the coated surface, remove oil, ensure that the surface is clean and free of impurities; The thermal conductive silicon mud is coated on the contact surface of the product by point coating or equipment extrusion; After use, the unused product should be sealed and stored in time.