LED Lighting
Indoor lamps will use some adhesive products in the structural assistance, such as sealant, cooling materials, gap filling, filling insulation glue, etc., mainly used in filament lamps, bulb lamps and indoor display and line lights.
| Model | Application point | Product type | Component | Curing condition | Solution |
| MDSI N7339 | Bubble light | Silicone | 1K | Room temperature | Shell bonding |
| MDEP 3225FR | Bubble light | Epoxy | 2K | Room temperature/heat cure | Plug bonding |
| MDTIM 5525 | Bubble light | Silicone | 1K | Room temperature | Aluminum substrate heat dissipation |
| MDEP 3225FR | T8 light tube | Epoxy | 2K | Room temperature/heat cure | Plug bonding |
| MDSI N7339 | T8 light tube | Silicone | 1K | Room temperature | Light strip bonding |
| MDSI 6530 | Filament lamp | Silicone | 2K | Room temperature/heat cure | Base bonding |
| MDSI 6250 | Filament lamp | Silicone | 2K | Room temperature/heat cure | Filament potting |
| MDTIM 5525 | Down light | Silicone | 1K | / | PCB board heat conduction |
Contact Us
Ask for Sample&TDS
Indoor lamps will use some adhesive products in the structural assistance, such as sealant, cooling materials, gap filling, filling insulation glue, etc., mainly used in filament lamps, bulb lamps and indoor display and line lights.
| Model | Application point | Product type | Component | Curing condition | Solution |
| MDSI 6125 | Strip light | Silicone | 2K | Room temperature/heat cure | Lamp surface potting |
| MDSI 6250 | Strip light | Silicone | 2K | Room temperature/heat cure | Lamp surface potting |
| MDSI 7005 | Strip light | Silicone | 1K | Room temperature | End cap seal |
| MDSI 7002 | Strip light | Silicone | 1K | Room temperature | Glass cover plate bonding |
| MDTIM 6230 | Strip light | Silicone | 2K | Room temperature/heat cure | Power potting |
| MDSI N7339 | floodlight | Silicone | 1K | Room temperature | Glass cover plate bonding |
| MDTIM 5525 | floodlight | Silicone | 1K | / | Aluminum substrate heat dissipation |
| MDTIM 5512 | floodlight | Silicone | 1K | / | Aluminum substrate heat dissipation |
| MDSI N7339 | Underground light | Silicone | 1K | Room temperature | Glass cover plate bonding |
| MDSI 7005 | Underground light | Silicone | 1K | Room temperature | End cap seal |
| MDEP 3108 | Underground light | Epoxy | 2K | Room temperature/heat cure | Clear potting adhesive |
Contact Us
Ask for Sample&TDS
Inert gas lamps and led new explosion-proof lamps have different high temperature life. Under the requirements of high explosion-proof, Beginor Technology adhesive has a comprehensive solution from the aspects of structural bonding, protective sealing, and selection of heat dissipation media.
| Model | Application point | Product type | Component | Curing condition | Solution |
| MDSI N7339 | Explosion-proof luminaire | Silicone | 1K | Room temperature | Glass cover bonding |
| MDTIM 5525 | Explosion-proof luminaire | Silicone | 1K | / | Aluminum substrate heat dissipation |
| MDPU 8110 | Explosion-proof luminaire | PU | 2K | Room temperature/heat cure | Plugging of the threading hole |
Contact Us
Ask for Sample&TDS
LED power supply is a kind of power supply, is a device that provides power to electronic devices, and is also a power supply. It is a device that converts alternating current into direct current through transformers and rectifiers. This device is called rectifier power supply, also known as drive power supply.
| Model | Application point | Product type | Component | Curing condition | Solution |
| MDTIM 6230 | LED power supply | Silicone | 2K | Room temperature/heat cure | PCB potting |
| MDSI 7005 | LED power supply | Silicone | 1K | Room temperature | Sealing of the threading slot |
| MDSI 7091 | LED power supply | Silicone | 1K | Room temperature | Solder joint isolation |
| MDSI 7096 | LED power supply | Silicone | 1K | Room temperature | Solder joint isolation |
Contact Us
Ask for Sample&TDS