MDEP 3688 Low viscosity One Compound Epoxy adhesive

MDEP 3688 Low viscosity One Compound Epoxy adhesive
Transparent light blue liquid
Good temperature resistance, low total chlorine.
Strong toughness, high bonding strength, impact resistance and shock resistance

Good acid and alkali resistance, moisture, water, oil and dust resistance, humidity and heat resistance and atmospheric aging.

Product description

This product for heating and curing type, has good temperature resistance, low total chlorine.
It needs to be heated and cured, and needs to be kept at low temperature (below -10℃).
After curing, it has strong toughness, high bonding strength, impact resistance and shock resistance.
The cured material has good acid and alkali resistance, moisture, water, oil and dust resistance, humidity and heat resistance and atmospheric aging.
The cured material has good insulation, compression resistance, high bonding strength electrical and physical properties.

Data Sheet

Item		Test method or condition	Test results
Before cured	Appearance	Visual	Transparent light blue liquid
	viscosity	25℃（mPa.s）	1,100±200
	Density	25℃（g/cm3）	1.10±0.05
	Curing conditions	Warming	150℃/30min
After cured	Hardness	Shore-D	≥80
	Shear strength	MPa,Fe/Fe,25℃	≥8
	Volume Resistance	Ω·cm, 25 ° C	1.0 x 1014
	Surface resistance	Ω, 25 ° C	2.2 x 1014
	Dielectric strength	KV/mm, 25 ° C	> 15
	Dielectric constant		≥2.8

Provide excellent bonding properties, electrical properties, moisture resistance and mechanical properties, and has high bonding strength for most substrates including glass, metal, ceramics, etc. At the same time can meet the high temperature bonding and mechanical performance requirements, widely used in automotive electronics, pressure sensors, wiring harnesses, motor magnetic sheet bonding.

How to use

Use process

Since the product is a chemical product that reacts when heated, the ambient temperature has a great impact on the quality of the product. Please keep the product in a low temperature (below -10℃) environment to ensure the stability and quality of the product.
After taking out the gel that can not be used up, please cover tightly sealed in time and put it back into the frozen environment for storage.
In a very small number of people who contact the gel for a long time will produce mild skin allergy, mild itching and pain, it is recommended to wear protective gloves when using, stick to the skin, please wipe with acetone or alcohol, and use detergent to clean.
Before using a large amount, please try a small amount first to master the use of the product skills to avoid mistakes.