MDTIM 5515 1.5w thermal conductivity silicone grease
- In addition to high thermal conductivity, this series of products does not produce stress when used, high stability at -50 to +250 ° C, and has excellent weather resistance, radiation resistance and excellent dielectric properties.
- This series of products are widely used in LED, microprocessor, memory module, high-speed buffer memory, sealed integrated chip, DC/DC converter, IGBTs and other power modules, power semiconductors, solid state relays and bridge rectifier and other fields.
- Thermal conductivity: 1.5W /m.K
- Low settling, store at room temperature
- Superior resistance to high and low temperatures, excellent weather and radiation resistance
- Radiation and superior dielectric properties
- Excellent chemical and mechanical stability
- UL No.:E538545
MDTIM 5515 single-component thermal conductive silicone grease is used as thermal conductive material in electronic devices, with excellent thermal conductivity. The viscosity of this product is low, which can make close contact between the surface of the electronic components that need to be cooled and the radiator, reduce the thermal resistance, and can quickly and effectively reduce the temperature of the electronic components, thus extending the service life of the electronic components and improving their reliability. MDTIM series single component thermal grease will not be cross-linked, so in the process of electronic assembly, if there is any change or replacement of the radiator, this product has the characteristics of easy operation.
| Items | Test Methods | MDTIM 5515 |
| Base material | ASTM D374 | Siloxane |
| Appearance | Visual | White liquid |
| Viscosity mPa.s | G B/T2794-2013 | Half Flow |
| Thermal conductivity(W/m∙K) | ASTM D5470 | 1.5 |
| Density (g/ cm3) | ASTM D792 | 2.75 |
| Volatile matter (%) | HD/T2502-1993 | <1 |
| Oil dispersion (%) | HD/T2502-1993 | <0.5 |
| Dielectric constant (MHz) | ASTM D150 | 3.4 |
| Volume resistance (Ω·cm) | ASTM D257 | ≥2×1014 |
| Long-term use temperature range℃ | -60-250°C |
- Power module
- Integrated chip
- Power module
- Car electronics
- Telecommunications equipment
- Computers and accessories
How to use
- Clean the surface of the second coating, extrude sufficient amount of MDTIM series single component thermal grease to the surface of the device through the syringe, and then apply slight pressure to the second surface.
- If any extruded silicone grease can be wiped with a cloth. It should be sealed for later use after each use.
- Or use screen printing machine for construction work.
- Storage and transportation
- MDTIM series single component thermal grease non-combustible material, storage life of about 24 months at room temperature
- More than 12 months, if the settlement can be stirred evenly, can still be used
