MDGEL 6710(2#) Blue Silicone gel for cable box

1:1 additive molding, strong adhesion, self-healing
High elongation; Excellent flexibility, eliminating mechanical stress
Very low oil permeability after curing, excellent resistance to toxicity
High temperature electrical insulation is excellent, to provide protection against high pressure
Excellent aging resistance and weather resistance
Excellent waterproof, anticorrosive, moisture-proof, chemical medium resistance
It can be used in semiconductor modules, connectors, sensors, etc

Product description

MDGEL 6710(2#) is a blue two-component self-healing silicone gel. After curing, it forms a special soft material that is buffered and automatically recovers. Used to insulate circuit boards from moisture and other harmful contaminants, and to provide insulation against high voltages. Another use is to provide stress relief to protect circuits and interconnectors from high temperature and mechanical stress.

Data Sheet

	Component A	Component B
Appearance	Colorless clear liquid	Blue liquid
Viscosity,25℃, mPa.s	300-600	300-600
Specific gravity, g/cm3	0.99	0.99
Mix ratio	A: B = 100:100 weight ratio
Viscosity after mixing	350-550 mPa.s
Operating time after mixing	≥ 25℃ for 5 minutes
Gel time	40-60 minutes 25℃
Hardening conditions	4 hours at 25 ℃ or 20 minutes at 80℃
Appearance	Colorless clear gel
Needle penetration	70-90
Dielectric strength (KV/mm)	25
Volume resistance (Ω·cm) DC500V	1.0×1015
Loss factor (1 MHz)	＜0.001
Dielectric constant (1 MHz)	2.8
Service temperature range	– 60 ∽ 200 ℃

Application

Typical Applications

Power modules, such as thyristors,
Solid state relays, diode packages
Cable junction box filling
Waterproof junction box fill
Motor lead box
Electric vehicle control box

How to use

Operation Use craft

The A and B components are weighed at a ratio of 1:1, mixed evenly, and injected directly into the components (or modules) that need to be potting and protected.
The potting components can be put to rest and cured at temperature (about 20 minutes under the condition of 80℃), or cured directly at room temperature, which takes about 4 hours.