MDSI 7199 Grey Silicone adhesive

Good oil resistance
Single component silicone adhesive
Used for all kinds of mechanical equipment parts joint surface sealing

Product description

MDSI 7199 silicone adhesive is a single component, neutral deoxime type room temperature curing silicone sealant, gray, colloidal fine, no impurities, high strength and mechanical properties, with good oil resistance, lubricating oil performance

Data Sheet

Test items		Test standard	MDSI 7199
Color		Visual	Grey paste
Density (g/cm³, 25℃)		GB/T 15223-1994	1.4±0.05
Tack-free Time (min, 25℃, 55%RH)		GB/T13477.5-2002	5-20
Extrusion rate(min, 25℃, 55%RH)		g/5s, 0.4Mpa	5-25
Hardness (Shore A)		GB/T 531.1-2008	40±5
Temperature range for use (° C)		GB/T 20028-2005	-60～250
Elongation (%)		GB/T 528-2009	≥350
Tensile strength (Mpa)		GB/T 528-2009	≥2.8
Tensile strength (Mpa)	Oil resistance	GB/T 528-2009	≥1.6
Hardness (Shore 00)		GB/T 531.1-2008	≥60
Elongation (%)		GB/T 528-2009	≥350
Volume resistivity (DC500V, Ω·cm)		GB/T 1692-92	≥1.0×10¹⁴
Dielectric strength (kV/mm)		GB/T 1695-2005	≥18
Dielectric constant (1MHz)		GB/T 1693-2007	≤3.3
Oil loss resistance(3# oil, %)		—	≤2

Application

Used for all kinds of mechanical equipment parts joint surface sealing.

How to use

Handling precautions

When using solvents, avoid contact with skin and eyes, heat sources, sparks, and open flames. Always provide adequate ventilation. Obtain and follow handling precautions from your solvent supplier.
Product safety information necessary for safe use is not included. Read product and safety instructions and container labels for safe use, physical and health hazard information before operating. You can obtain a copy from your local sales representative or dealer.