MDSI 7096 one component Silicone adhesive

Neutral alkoxy curing system
Good compatibility with Pt catalytic system
Paste does not hang
No bottom coating adhesive performance is good
Good continuous thermal stability (-55-200℃)
Good high temperature electrical insulation

Product description

MDSI 7096 Dealcoholized silicone bonding sealant is a neutral silicone sealing material that absorbs moisture in the air to cure at room temperature, and cannot be heated to cure.

Data Sheet

Appearance	Visual	Unit	7096	7096
Appearance	Visual	—	White/Black	Yellow translucent
Viscosity	GB/T 2794-2022		Paste	Paste
Tack-free Time	GB/T13477.5-2002	min	≤30	10-40
Hardness	GB/T 531.1-2008	Shore A	20±3	20±3
Density	GB/T 13354-1992	g/cm³	1.33±0.03	1.05±0.05
Elongation at break	GB/T 528-2009	%	≥250	≥250
Anti-toxicity	See note 2	–	Fully cured	Fully cured
Tensile strength	GB/T 528-2009	Mpa	≥1.0	≥1.0
Shear strength	GB/T 7124-2008	Mpa, Fe/Fe	2.2	≥0.90
Tear strength	GB/T 529-2008	N/mm	7	7
Dielectric strength	GB/T 1693-2007	kV/mm（25℃）	18	18
Loss factor	GB/T 1693-2007	(1MHz) (25℃)	0.001	0.001
Dielectric constant	GB/T 1693-2007	(1MHz) (25℃)	2.9	2.8
Volume resistance	GB/T 1692-2008	(DC500V) Ω· cm	≥5.0*10¹⁴	≥5.0*10¹⁴

MDSI 7096 is mainly designed to protect the non-curing phenomenon caused by the failure of the passive catalyst of the additive potting-sealant. 7096 is used to do the isolation of toxic sources, including possible materials: PVC/ peroxide-vulcanized rubber, anti-aging agents containing sulfur phosphorus nitrogen elements, unsaturated polyester, tin lead and other organometall catalysts.

How to use

Operation process

Clean the surface: the surface of the sticky or coated material is cleaned, and the rust, dust and oil are removed with cleaning agent.
Sizing: Cut the nozzle to the required size and load it into the glue gun. Squeeze the glue solution onto the cleaned surface for an even distribution. When bonding, the adhesive surface can be closed and fixed.
Solidification: the coated part is placed in the air, and can be put into use after 24 hours of room temperature curing.
Note: After opening, use it up as much as possible once, once not used up, when using again, squeeze out the cured part, continue to use, does not affect normal use.
Please consult MDTECH Marketing Department for dispensing equipment.